Rule <R7>j states that "Zip ties that are identical in length and thickness to those included in the VEX V5 product line (1/10” Wide; 4” or 11” long).
The zip ties on the VEX Robotics products page (https://www.vexrobotics.com/zip-ties.html) state that the 4" long zip ties (276-1032) are 1/10" wide while the 11" long zip ties do no list a width. Upon ordering the VEX branded (275-0125) 11" zip ties, they were found to measure 3/16" wide. Also, image of the 11" long zip tie shown on the VEX robotics products page appears to be greater than 1/10" wide.
Does the 1/10" width restriction apply to VEX branded 11" long zip ties? If not, is the correct width 3/16".